Background
An equipment integrator / manufacturer in Optoelectronics and display needed to dispensing on a lens holder using UV-curing structural adhesive.
Process challenge
Bead width and height must stay stable with no edge creep.
Solution
We recommended Dispensing Valve + Glue Distributing Machine, with pairing a micro screw valve with a level sensor in closed loop for accurate volumetric output.
Result
- Filler-related stoppages reduced from three per week to one per month.
- Shot volume 0.02 mL with deviation within ±2%.
- Cycle time 0.8 s per dot with no stringing or dripping during continuous running.
Project facts
- Industry: Optoelectronics and display
- Workpiece: lens holder
- Fluid: UV-curing structural adhesive
- Process: dispensing
- Recommended lines: Dispensing Valve, Glue Distributing Machine
Note: this case is placeholder demo content showing the structure of the section. Replace it with real project data before publishing.
Scan to visit our site