Optoelectronics and display lens holder sealing and bonding: filled thermal gel case study

Background

An equipment integrator / manufacturer in Optoelectronics and display needed to sealing and bonding on a lens holder using filled thermal gel.

Process challenge

Bead width and height must stay stable with no edge creep.

Solution

We recommended Dispensing Valve + Glue Distributing Machine, with tuning rotor/stator fit and flow path geometry to the filler particle size.

Result

• Overall equipment availability improved by about 12%.
• Shot volume 0.4 mL with deviation within ±2%.
• Cycle time 0.5 s per dot with no stringing or dripping during continuous running.

Project facts

• Industry: Optoelectronics and display
• Workpiece: lens holder
• Fluid: filled thermal gel
• Process: sealing and bonding
• Recommended lines: Dispensing Valve, Glue Distributing Machine

Note: this case is placeholder demo content showing the structure of the section. Replace it with real project data before publishing.