Background
An equipment integrator / manufacturer in Optoelectronics and display needed to metered filling on a light guide assembly using polyurethane potting compound.
Process challenge
Large potting volume where voiding and incomplete fill are hard to balance.
Solution
We recommended Dispensing Valve + Glue Distributing Machine, with fitting quick-change interfaces and parameter recipes to shorten setup time.
Result
- Overall equipment availability improved by about 12%.
- Shot volume 0.1 mL with deviation within ±2%.
- Cycle time 1.1 s per dot with no stringing or dripping during continuous running.
Project facts
- Industry: Optoelectronics and display
- Workpiece: light guide assembly
- Fluid: polyurethane potting compound
- Process: metered filling
- Recommended lines: Dispensing Valve, Glue Distributing Machine
Note: this case is placeholder demo content showing the structure of the section. Replace it with real project data before publishing.
Scan to visit our site