New energy and storage storage module potting: two-component epoxy case study

Background

An equipment integrator / manufacturer in New energy and storage needed to potting on a storage module using two-component epoxy.

Process challenge

Supply pressure ripple during continuous running, causing volume drift.

Solution

We recommended Glue Supply System + Screw Valve + Glue Distributing Machine, with using a servo dispensing module with a programmable speed profile to hold a constant extrusion rate.

Result

Volume repeatability improved from ±5% to within ±2%.
Shot volume 0.02 mL with deviation within ±2%.
Cycle time 1.1 s per dot with no stringing or dripping during continuous running.

Project facts

Industry: New energy and storage
Workpiece: storage module
Fluid: two-component epoxy
Process: potting
Recommended lines: Glue Supply System, Screw Valve, Glue Distributing Machine