Background
An equipment integrator / manufacturer in New energy and storage needed to dispensing on a prismatic battery cell using thermal grease.
Process challenge
Very small shot volume with high repeatability demands, plus overflow and stringing risk.
Solution
We recommended Glue Supply System + Screw Valve + Glue Distributing Machine, with pairing a micro screw valve with a level sensor in closed loop for accurate volumetric output.
Result
- Volume repeatability improved from ±5% to within ±2%.
- Shot volume 0.4 mL with deviation within ±2%.
- Cycle time 0.5 s per dot with no stringing or dripping during continuous running.
Project facts
- Industry: New energy and storage
- Workpiece: prismatic battery cell
- Fluid: thermal grease
- Process: dispensing
- Recommended lines: Glue Supply System, Screw Valve, Glue Distributing Machine
Note: this case is placeholder demo content showing the structure of the section. Replace it with real project data before publishing.
Scan to visit our site