New energy and storage CCS busbar dispensing: conductive silver adhesive case study

Background

An equipment integrator / manufacturer in New energy and storage needed to dispensing on a CCS busbar using conductive silver adhesive.

Process challenge

Tight cycle time with frequent changeovers that squeeze setup time.

Solution

We recommended Glue Supply System + Screw Valve + Glue Distributing Machine, with pairing a micro screw valve with a level sensor in closed loop for accurate volumetric output.

Result

Filler-related stoppages reduced from three per week to one per month.
Shot volume 1.5 mL with deviation within ±2%.
Cycle time 0.5 s per dot with no stringing or dripping during continuous running.

Project facts

Industry: New energy and storage
Workpiece: CCS busbar
Fluid: conductive silver adhesive
Process: dispensing
Recommended lines: Glue Supply System, Screw Valve, Glue Distributing Machine

Note: this case is placeholder demo content showing the structure of the section. Replace it with real project data before publishing.