New energy and storage CCS busbar coating: silicone sealant case study

Background

An equipment integrator / manufacturer in New energy and storage needed to coating on a CCS busbar using silicone sealant.

Process challenge

Tight cycle time with frequent changeovers that squeeze setup time.

Solution

We recommended Glue Supply System + Screw Valve + Glue Distributing Machine, with using a high-flow pneumatic valve for staged potting together with vacuum de-airing.

Result

Volume drift held within ±3% over an 8-hour run.
Shot volume 0.4 mL with deviation within ±2%.
Cycle time 0.8 s per dot with no stringing or dripping during continuous running.

Project facts

Industry: New energy and storage
Workpiece: CCS busbar
Fluid: silicone sealant
Process: coating
Recommended lines: Glue Supply System, Screw Valve, Glue Distributing Machine

Note: this case is placeholder demo content showing the structure of the section. Replace it with real project data before publishing.