Background
An equipment integrator / manufacturer in New energy and storage needed to metered filling on a storage module using two-component epoxy.
Process challenge
Supply pressure ripple during continuous running, causing volume drift.
Solution
We recommended Glue Supply System + Screw Valve + Glue Distributing Machine, with tuning rotor/stator fit and flow path geometry to the filler particle size.
Result
- Setup time cut from 40 minutes to under 15 minutes.
- Shot volume 0.02 mL with deviation within ±2%.
- Cycle time 0.8 s per dot with no stringing or dripping during continuous running.
Project facts
- Industry: New energy and storage
- Workpiece: storage module
- Fluid: two-component epoxy
- Process: metered filling
- Recommended lines: Glue Supply System, Screw Valve, Glue Distributing Machine
Note: this case is placeholder demo content showing the structure of the section. Replace it with real project data before publishing.
Scan to visit our site