Medical and consumables microfluidic chip coating: thermal grease case study

Background

An equipment integrator / manufacturer in Medical and consumables needed to coating on a microfluidic chip using thermal grease.

Process challenge

Bead width and height must stay stable with no edge creep.

Solution

We recommended Screw Valve + Sensor, with tuning rotor/stator fit and flow path geometry to the filler particle size.

Result

• Volume drift held within ±3% over an 8-hour run.
• Shot volume 0.05 mL with deviation within ±2%.
• Cycle time 1.0 s per dot with no stringing or dripping during continuous running.

Project facts

• Industry: Medical and consumables
• Workpiece: microfluidic chip
• Fluid: thermal grease
• Process: coating
• Recommended lines: Screw Valve, Sensor